Phosphoric Acid Use
CAS Number: 7664-38-2
Physical state: Transparent, colorless, viscous solution
EINECS:231-633-2
Chemical formula:H3PO4
Xiamen Ditai Chemicals Co., Ltd. is one of the most reliable manufacturers and suppliers of phosphoric acid use in China. Welcome to buy high quality chemical products at competitive price from our factory.
Phosphoric acid
Phosphoric Acid use Introduction:
Phosphoric acid, also known as orthophosphate (molecular formula H3PO4), is a pure colorless, transparent, viscous liquid or rhombic crystal, odorless, and has a very sour taste.
Phosphoric acid use chemical properties:
Melting point:~40 ° C (lit.)
Boiling point: 158 ° C (lit.)
Density: 1.685g/mLat25 ° C (lit.)
Vapour density: 3.4 (vsair)
Vapour pressure: 2.2mmHg (20 ° C)
Refractive index: n20/D1.433
FEMA:2900|PHOSPHORICACID
Storage conditions: Chemicalbooknorestrictions
Solubility: H2O: solid
Acidity coefficient (pKa): 2.1-7.2-12.3 (at 25 ℃)
Form: SolidorViscousLiquid
Color: ≤ 10 (APHA)
Specific gravity: 1.7
Odor: Odorless
PH range of acid-base indicator color change: 1.5
|
ITEM |
SPECIFICATION |
|
(H3PO4) H3PO3 CaSO4 Acetic acid NaNO3 P2O5 |
85.0% <120mg/kg <1500ppm <10ppm <5ppm >61.5% |
Phosphoric Acid use:
Mainly used as catalysts for ethylene hydration to produce ethanol, high-purity phosphates, pharmaceutical manufacturing, and chemical reagents.
Content analysis:
GB3149-92 method mixed indicator: Take 3 parts (V) of 0.1% thymol blue solution and 2 parts (V) of 0.1% phenolphthalein solution, and mix evenly. The method of determining the weight of procedures is also known as the arbitration method. Take 5g of the sample (weighed to 0.0002g) and place it in a 100ml beaker. Add 10ml of hydrochloric acid, cover with a petri dish, boil for 10 minutes, cool and transfer to a 500ml volumetric flask. Add 10ml of hydrochloric acid, make up to volume with water, and shake well. Take 50ml of the solution and place it in a 500ml volumetric flask. After making up to volume with water, shake well to obtain the sample solution. Take 20ml of the sample solution and place it in a 400ml beaker. Dilute it with water to 100ml, add 50ml of TS-202 test solution, cover it with a petri dish, and heat the Chemicalbook on an electric heating plate until the temperature inside the cup reaches 75 ℃± 5 ℃. Keep it for half a minute or keep it in a water bath until the solution is layered (do not heat it with an open flame, and do not stir it evenly when adding reagents or heating to avoid the formation of blocky substances). Rotate it 3-4 times during the cooling process. Filter with a No. 4 glass crucible that is pre weighed at a constant temperature of 175-185 ℃ (or 240-260 ℃). First, filter the upper clear liquid and wash the precipitate 3-4 times using the pouring method, with about 20ml of water used each time. Filter the washing solution through the crucible, then transfer the precipitate to the glass crucible and continue washing with water 5-6 times. Place the crucible in an oven at 175-185 ℃ for 45 minutes (or in an oven at 240-260 ℃ for 15 minutes). Cool the glass crucible in a dryer to room temperature and weigh it. Perform a blank test with the same measurement procedure.








Thanks for your visit and welcome your kind inquiry!
Hot Tags: phosphoric acid use, China phosphoric acid use manufacturers, suppliers, factory, Diluting Phosphoric Acid, Phosphoric Acid H3po4, Phosphoric Acid, Phosphoric Acid Agriculture Use, Super Phosphoric Acid, Diluted Phosphoric Acid
You Might Also Like
Send Inquiry



